Electrical fitting jobs in Alness

Fill any gaps you have in your schedule.
Tradesman Start

Electrical fitting Jobs in Alness (completed jobs only)

2 wall heaters and door intercom not working
Electrical fitting job 304 miles from Alness in Manchester
2 wall heaters - that lay back to back on each side of a wall - will not turn on. This issue has occurred before and at that time, it was a broken wire to the main fuse box (close by). Also, the intercom buzzer doesn’t work in the upstairs unit but again, this happened before and the issue was a wire connecting to the fuse box.
Outdoor electrical assessment and repair
Electrical fitting job 477 miles from Alness in Chatham
We have outdoor electrics, fed through an 18mm cabling and in its own sour/box, which is now blowing. Also need new electrical system for other parts of garden
Replace isolator switch on hot tub
Electrical fitting job 375 miles from Alness in Hinckley
Corroded isolator switch feeding hot tub needs replacing
Power point to boiler dead so might need new wire
Electrical fitting job 301 miles from Alness in Salford
The switch to turn my boiler on not working. Think it might need a new wire.
double oven the lower part not working
Electrical fitting job 458 miles from Alness in Chiswick
It Siemens double oven it is working just before trying to change the connection by ammeter he did not know how to do it but the oven has no problem
1 half of a 2 plug socket is not working.
Electrical fitting job 352 miles from Alness in Nottingham
One half of a 2 plug socket requires repair.
Install 4 ceiling lights in a new house
Electrical fitting job 451 miles from Alness in Harrow
A wire with a light bulb is already there.
Replace shower switch
Electrical fitting job 493 miles from Alness in Portsmouth
Replace switch to shower in bathroom
Replace 4 ceiling light fittings
Electrical fitting job 306 miles from Alness in Stockport
Four new ceiling light fittings to replace old fittings.
Bathroom vent fan installation
Electrical fitting job 305 miles from Alness in Manchester
Remove the old fan and install a new fan I have purchased
need earth bonding for gas meter and water pipes
Electrical fitting job 304 miles from Alness in Manchester
Need earth bonding work to the gas and/or water up to 18th edition standards.
Replace 2 ceiling mounted light fixtures
Electrical fitting job 421 miles from Alness in Newmarket
Replace 2 ceiling mounted light fittings
Plugs and lights
Electrical fitting job 317 miles from Alness in Macclesfield
3 new socket fronts. 2 new light switches. 1 new bathroom light. 2 new plugs in new kitchen. 1 socket and back box in bedroom.
uninstall electric cooker and install a diswaher in its plce
Electrical fitting job 463 miles from Alness in Streatham Hill
There is an electric cooker to be removed and a dishwasher installed in place of it. It will be about 160 cms from the sink drain, The job will need a plumber too.
changing an electric induction Hob & bathroom extractor fan
Electrical fitting job 463 miles from Alness in Crofton Park
As above. Needs to be done on Saturday the 3rd of Feb.
Replace flourescent ceiling light fitting in kitchen.
Electrical fitting job 511 miles from Alness in Saint Leonards-on-sea
Fit new LED light in kitchen. 1.5 metres.
light switches
Electrical fitting job 456 miles from Alness in Kilburn
3 small jobs: 1) the cord came out of a bathroom light. Can we reconnect, either with the original cord or a switch? 2) Fixing a kitchen light. 3) Checking a faulty plug socket.
Oven installation
Electrical fitting job 467 miles from Alness in Thornton Heath
Old ovens needs removing and new one fitted. Both ovens come with a plug so doesn’t need wiring
small electric job
Electrical fitting job 421 miles from Alness in Newport
ceiling fan switch replaced in Bathroom and kitchen, electrics added to bathroom and outdoor socket to be fitted.
three small jobs need doing around the house.
Electrical fitting job 478 miles from Alness in Sevenoaks
Tricky power point in bedroom needs replacing Porch light needs new bulb holder and wire Outside light on senser may need replacing