Garages & Sheds jobs in Accrington

Fill any gaps you have in your schedule.
Tradesman Start

Garages & Sheds Jobs in Accrington (completed jobs only)

Refelt with premium felt 8x16ft shed
Garages & Sheds job in Accrington
Refelt with premium felt 8ft x16ft sloping roof shed, end boards may need replacing
Roof felt needs replacing and some cladding strips also need to be replaced where original cladding has either shrunk or showing signs of deterioration
replace roof felt on two sheds
Garages & Sheds job 5 miles from Accrington in Rossendale
Replace the felt on a 10' x 8' shed and a 7' x 5' shed Areas to be covered are approx. 10sq.m for the big shed and 4.6sq.m for the small shed.
Erect plastic shed
Garages & Sheds job in Accrington
I am going to purchase a 6ft x 4ft plastic shed of which I will need assembling. I also have a wooden shed that will need dismantling and taking away.I also have a bit of garden waste that needs removing and taking away, I think it's about 30 minutes work to remove the garden waste.
2 rows of felt roof blown off summerhouse roof by storm
Garages & Sheds job 5 miles from Accrington in Blackburn
Felt strips ripped off apex of summerhouse roof by recent storm. Needs 2 new strips of black roofing felt to be supplied and fitted - ideally quickly in view of current weather. (I have loads of clout nails that you can use.)
Replace felt on shed
Garages & Sheds job 8 miles from Accrington in Ramsbottom
Felt on shed roof to be replaced with new approx 2m x 2.5m
Small shed roof needs fixing
Garages & Sheds job 5 miles from Accrington in Darwen
Small shed/old outhouse (2m X 1.5 m) in backyard needs flat roof fixing. The felting on it looks ok but the roof is leaking and it seems to be bowing and water is collecting on it.
Refelt Garden Shed
Garages & Sheds job 9 miles from Accrington in Nelson
I need the old felt removing of mine, refelting with good quality felt (reinforced polyester felt or mineral faced torch preferred) and old felt disposing of. The shed has a pitched roof and is 2.5 x 3.1 metres. Total price including parts, labour and VAT required.
Re-felt shed roof
Garages & Sheds job 11 miles from Accrington in Bury
Wooden shed, 20ft length x 9ft width x 8ft to peak. Old felt & batons removed, replaced by new felt & batons.
4x4 shed with apex roof needs complete roof and felt
Garages & Sheds job 15 miles from Accrington in Bolton
Felt and timbers needed on 4x4 apex roof
Replace felt on shed
Garages & Sheds job 13 miles from Accrington in Bolton
Replace felt on shed roof. Shed is 8 x 6 with a pent roof.
timbers at bottom are rotten
Garages & Sheds job 17 miles from Accrington in Oldham
shed rotted side timbers and floor along 2 edges rotted
Summerhouse advice re repair/re roof
Garages & Sheds job 17 miles from Accrington in Swinton
Roof slightly leaking and facias and some wood needs replacing. General advice re what is required
Replacement felt on shed
Garages & Sheds job 17 miles from Accrington in Swinton
Need new felt replacement on shed
New shed roof felt
Garages & Sheds job 12 miles from Accrington in Bolton
The felt on my shed roof is falling apart and it needs re-covering.
Reseal felt on 10x8 shed
Garages & Sheds job 11 miles from Accrington in Bury
Due to roof bowing roof is leaking through the seams in the felt. Needs reseal or overlay to the seams
Dismantle and move shed
Garages & Sheds job 14 miles from Accrington in Leyland
The shed is at the side of the house and I would like it moved to the bottom of the garden -something like 50 feet. It would need to be dismantled first and ground levelled on new site.
repair leak bay window flat felt roof
Garages & Sheds job 19 miles from Accrington in Eccles
estimate reqd to repair leak on felted flat bay window roof for oap tnx
Concrete floor 7ft x 7ft
Garages & Sheds job 17 miles from Accrington in Swinton
Concrete floor 7ft x 7ft Inside garage
Replace or re pair wooden shed roof which bows
Garages & Sheds job 16 miles from Accrington in Manchester
The roof of my shed which is fairly new has always leaked from new. It bows so that water isn't running off properly. I think it needs reconstructing but am open to advice