Garages & Sheds jobs in Bamber Bridge

Fill any gaps you have in your schedule.
Tradesman Start

Garages & Sheds Jobs in Bamber Bridge (completed jobs only)

Dismantle and move shed
Garages & Sheds job 3 miles from Bamber Bridge in Leyland
The shed is at the side of the house and I would like it moved to the bottom of the garden -something like 50 feet. It would need to be dismantled first and ground levelled on new site.
Replace felt on garden shed 5'x6'
Garages & Sheds job 5 miles from Bamber Bridge in Chorley
Felt on shed roof needs attention apex leaking 5'x6'
Shed roof and panel repairs
Garages & Sheds job 5 miles from Bamber Bridge in Chorley
Felt on shed roof is approx 6ft by 8ft
2 rows of felt roof blown off summerhouse roof by storm
Garages & Sheds job 6 miles from Bamber Bridge in Blackburn
Felt strips ripped off apex of summerhouse roof by recent storm. Needs 2 new strips of black roofing felt to be supplied and fitted - ideally quickly in view of current weather. (I have loads of clout nails that you can use.)
Small shed roof needs fixing
Garages & Sheds job 8 miles from Bamber Bridge in Darwen
Small shed/old outhouse (2m X 1.5 m) in backyard needs flat roof fixing. The felting on it looks ok but the roof is leaking and it seems to be bowing and water is collecting on it.
Shed roof needs to be re-felted
Garages & Sheds job 7 miles from Bamber Bridge in Preston
Wind has stripped felt from shed roof. Need someone to supply and fit new felt. (Small shed)
Re-felt shed roof
Garages & Sheds job 16 miles from Bamber Bridge in Bury
Wooden shed, 20ft length x 9ft width x 8ft to peak. Old felt & batons removed, replaced by new felt & batons.
4x4 shed with apex roof needs complete roof and felt
Garages & Sheds job 14 miles from Bamber Bridge in Bolton
Felt and timbers needed on 4x4 apex roof
Replace felt on shed
Garages & Sheds job 15 miles from Bamber Bridge in Bolton
Replace felt on shed roof. Shed is 8 x 6 with a pent roof.
re-felting shed
Garages & Sheds job 20 miles from Bamber Bridge in Golborne
repair felt on shed
New shed roof felt
Garages & Sheds job 15 miles from Bamber Bridge in Bolton
The felt on my shed roof is falling apart and it needs re-covering.
Refelt with premium felt 8x16ft shed
Garages & Sheds job 12 miles from Bamber Bridge in Accrington
Refelt with premium felt 8ft x16ft sloping roof shed, end boards may need replacing
Shed 8 foot x 6 foot requires roof recovering with felt.
Garages & Sheds job 13 miles from Bamber Bridge in Skelmersdale
Shed 8 foot x 6 foot requires roof recovering with felt, Existing felt torn in recent gale force winds
Reseal felt on 10x8 shed
Garages & Sheds job 16 miles from Bamber Bridge in Bury
Due to roof bowing roof is leaking through the seams in the felt. Needs reseal or overlay to the seams
refelting 2m x 3m sloping garden shed roof
Garages & Sheds job 18 miles from Bamber Bridge in Haydock
Replace felt on garden shed roof which has started leaking after 12 years. Roof is 2 x 3 meters sloping front to back.
Replace floor and side of Tonge and groove shed
Garages & Sheds job 20 miles from Bamber Bridge in Golborne
It's a 6ft x 6ft shed. The floor is rotten on 1 side about 2 tonge and groove slates. The side is also very poor approximate 4 slates up again.
replace felt on shed roof
Garages & Sheds job 13 miles from Bamber Bridge in Skelmersdale
felt on shed roof has failed and started to leak, needs replacing with EPDM it has a pent roof and all timbers are good, shed measures 18ft x 9ft.
roof repair and refelt
Garages & Sheds job 20 miles from Bamber Bridge in Kirkby
i have a shed that is 17ft by 9ft the roof needs some repair and refelting
shed size 120 ft x 64 ft. Needs to have roof felt replaced
Garages & Sheds job 12 miles from Bamber Bridge in Accrington
Roof felt needs replacing and some cladding strips also need to be replaced where original cladding has either shrunk or showing signs of deterioration
Replace shed roof with EPDM.
Garages & Sheds job 18 miles from Bamber Bridge in Haydock
A 10 feet by 8 feet pent shed where the roof has started to leak. I would like a quote to replace this with EPDM. The barge boards seem to be in good condition and so are probably reuseable.