Joinery & Carpentry jobs in Mexborough

Fill any gaps you have in your schedule.

Tradesman Start

Tradesman Start
  1. Home
  2. Jobs
  3. Joinery & Carpentry
  4. South Yorkshire
  5. Mexborough

Joinery & Carpentry Jobs in Mexborough (completed jobs only)

Replace banister and rails also all internal doors
Joinery & Carpentry job 9 miles from Mexborough in Askern
Want my banister replaced also the railings on the landing and skirting down stairs also all internal doors
Fix 3 pre finished oak doors
Joinery & Carpentry job 5 miles from Mexborough in Rotherham
Fix 3 oak doors, 2 glazed and 1solid including door handles, latches etc.
Fitting new UPVC front door
Joinery & Carpentry job 8 miles from Mexborough in Sheffield
Measure and fit UPVC front door
Need skirting boards supplying and fitting in a front room
Joinery & Carpentry job 8 miles from Mexborough in Sheffield
Skirting boards supplying and fitting for a front room about 16 ft x 13ft. Sheffield 5 area
replace back door
Joinery & Carpentry job 8 miles from Mexborough in Sheffield
NEED A NEW BACK door
Erecting a pre bought porch canopy
Joinery & Carpentry job 9 miles from Mexborough in Askern
Erecting oak porch canopy already purchased supplying all fixing and roof tiles Quote and start date in wrighting asap
hang an oak door.
Joinery & Carpentry job 16 miles from Mexborough in Wakefield
Door needs trimming, handles and hinges fitting, then hanging.
Replace Balustrade and fire door to the Attic room
Joinery & Carpentry job 12 miles from Mexborough in Sheffield
1. New balustrade / banister is required to the attic stairs since the existing banister spindles of the attic room are set too wide apart and not safe. The job is to replace the existing banister meeting current building / safety standard OR ii) replace the handrail and fit new spindles between the existing newel posts meeting current standards. 2. To install fire door for the attic room 3. To box in the pipes in a bedroom
Wall panel
Joinery & Carpentry job 12 miles from Mexborough in Wakefield
I would like to have some wall panels and dado rail fixed to the bottom half of my room walls 5x4 room and cost to do there about
hang an interior door
Joinery & Carpentry job 12 miles from Mexborough in Sheffield
i need a door to be replaced in my house. standard interior wooden door. I don't have the door or fittings.
Kitchen doors to hang
Joinery & Carpentry job 19 miles from Mexborough in Wakefield
Kitchen doors and drawers to fix to kitchen units
Fit double doors
Joinery & Carpentry job 15 miles from Mexborough in Wakefield
Double doors need to be fitted hinges and handles need to be fitted to the doors as well
Some joinery required for installation of gas hob
Joinery & Carpentry job 12 miles from Mexborough in Sheffield
I would like to replace an electrical hob and install a gas one. A wooden casing duct needs to be opened to access the gas pipe, and then cut a bigger hole on the worktop for the new gas hob.
repair to bathroom floor
Joinery & Carpentry job 11 miles from Mexborough in Doncaster
chipboard type floor rotted by a long standing leak, now has a hole in it so new boards are needed before the bath can go back in
refit 2 internal doors & shorten double gate
Joinery & Carpentry job 14 miles from Mexborough in Wakefield
2 doors need shortening after new carpet. double gate too heavy, needs reducing in height & refitting
New bedroom doors
Joinery & Carpentry job 15 miles from Mexborough in Wakefield
supply and fit 7 internal doors white 5 standard 2 61cms wide approx
Putting up new doors
Joinery & Carpentry job 42 miles from Mexborough in Hull
6 new doors
Build a outdoor cat enclosure.
Joinery & Carpentry job 37 miles from Mexborough in Macclesfield
Build a bespoke cat enclosure to attach to my cottage wall. I have the design ready.
Replace internal doors
Joinery & Carpentry job 28 miles from Mexborough in Winterton
Replace internal doors
Build interior wooden wall with door frame and door
Joinery & Carpentry job 37 miles from Mexborough in Lincoln
The job is inside a house and the objective is to separate a lounge/diner into two rooms. You would be required to build a stud wall with a single door way and install a door for access. The width of the gap is 134" approx and the height is 79" approx. Plaster board will be required on each side of the wall. No electrical work is needed. Just in case you have allergies - we have a dog in the house.