Joinery & Carpentry jobs in Tower Hill

Fill any gaps you have in your schedule.
Tradesman Start

Joinery & Carpentry Jobs in Tower Hill (completed jobs only)

replace internal door
Joinery & Carpentry job 5 miles from Tower Hill in Streatham Hill
There is a frame but the old door is gone. Buying a new door
Fixing new wooden base for my boiler.The current one is old
Joinery & Carpentry job 2 miles from Tower Hill in Islington
The current square wooden base which the boiler sits on in the boiler cupboard is not stable, as the wood has become water damaged. A new base is needed. The boiler will be removed and replaced on the same day as the base is fitted. So a morning slot will be needed for the carpentry as the existing boiler will be removed in the morning and the new boiler fitted after the base has been replaced
adapting built in cupboard, painting
Joinery & Carpentry job 2 miles from Tower Hill in Holborn
I would like some doors instead of a panel put into the upper part of my built in cupboard. I also want some shelves put in to the upper part of the cupboard and the hanging rail replaced and put higher up, as well as a shelf built into the bottom of the cupboard. I would also like some painting done in the bedroom, kitchen and loungeroom. This requires some stripping of metal frames, wooden shelves and glass window which has been painted over
fit new front door + architrave to my flat
Joinery & Carpentry job 3 miles from Tower Hill in Deptford
There was forced entry to my flat during a burglary. My insurance company have asked me to get a quote from someone to buy and fit a new door and architrave which were both badly damaged. The flat is within a block of flats.
stud or partition wall build
Joinery & Carpentry job 3 miles from Tower Hill in Hackney Wick
I have a big room 4.8*4.8 meters. I want to create a bedroom in there for 7sqmas per council req. A fire door is needed in this bedroom.
interior wood door for bedroom needed
Joinery & Carpentry job 4 miles from Tower Hill in Greenwich
interior wood door 6 panel hollow door. need it for the bedroom
Replace rotted joist under decking on section of balcony
Joinery & Carpentry job 2 miles from Tower Hill in Rotherhithe
Replace rotted joist under decking on a small section of balcony terrace 3m x 3m approximately.
outside beading on wall
Joinery & Carpentry job 4 miles from Tower Hill in Stoke Newington
I NEED A CARPENTER TO REMOVE ROTTEN BEADING AND REPLACE WITH NEW BEADING. JOB IS IN EARLS COURT. THANKS COLM
hang two eclisse doors
Joinery & Carpentry job 3 miles from Tower Hill in Canary Wharf
* Two adjacent of Eclisse Classic Single Pocket Door Systems, frames already installed into partition wall * To hang (possibly trim) two of LPD Ash Grey Melbourne 35mm doors on the Eclisse runners and tension ?* Install architectural moldings (jambs etc) * Fit two of lock and strike plate * Ensure smooth running and locking
Install Treillis on wall and 2 rail shelves and a corner she
Joinery & Carpentry job 4 miles from Tower Hill in Stoke Newington
Treillis to install in living room wall. 2 rail shelves in kitchen. A corner wooden shelf in bedroom.
build a counter for a cafe
Joinery & Carpentry job 2 miles from Tower Hill in Walworth
build a counter for a cafe
Refurb of a fitted wardrobe
Joinery & Carpentry job 3 miles from Tower Hill in Canary Wharf
One side of the wardrobe needs replastering, and the interior partition and hanging pole need to be redone. Dimension: 90cm h x 84cm w with two sliding doors. Depth not measured.
fit internal bathroom and bedroom doors to existing frames
Joinery & Carpentry job 4 miles from Tower Hill in Clapham
I have just purchased a set of solid oak doors, I need them trimming down slightly and fitting to my existing bedroom and bathroom door frames please. I also require hinges, handles and locks fitting to doors, all have been purchased and ready on site. Looking for works to be done between hours of 9am and 5pm over the next couple of weeks.
Fit new skirting boards
Joinery & Carpentry job 3 miles from Tower Hill in Canary Wharf
Hi. I’m looking for a quote to fit two pieces of skirting board (1.92cm and 78.5cm). The walls/floors are uneven so will need screwing/nailing in. I can provide the skirting board but it will need to be cut to size. Thanks.
cupboard restoration and tiling
Joinery & Carpentry job 3 miles from Tower Hill in Camden Town
Kitchen wall unit is collapsing due to hinges becoming loose and needs to be reinstalled and bathroom ceiling needs tiling to help reduce condensation.
Small job relaxing runners on kitchen draws
Joinery & Carpentry job 3 miles from Tower Hill in Peckham
Kitchen draws have broken seems the runners have unscrewed
replace and fit shed door
Joinery & Carpentry job 3 miles from Tower Hill in Stockwell
need to replace and fit old shed door 100 x 190/195 with new; current hinges ok
Welding to resize bathroom vanity made of mango wood & iron
Joinery & Carpentry job 2 miles from Tower Hill in Islington
I am looking for someone to repurpose my bathroom vanity. It is made of mango wood & black iron and is currently of width 60cm. I need it to be narrowed to 54cm to fit in my new bathroom
Door removal
Joinery & Carpentry job 4 miles from Tower Hill in Stratford
Remove door
Hang 3 doors on frame
Joinery & Carpentry job 2 miles from Tower Hill in Dalston
Hello, please advise the cost of hanging three wooden doors on the frame and fitting the handles as well.