Is plastering over existing plaster possible / sensible?

Answers

It can be done by unibonding and scraping back the artex buy in my professional opinion it is best to overboard as a lot of artex contains asbestos

PLASTERING OVER EXISTING PLASTER IS PERFECTLY FINE, BUT TAKE NOTE IT MUST BE PREPPED BEFORE YOU START, ANY REPUTABLE PLASTERER THAT HAS SERVED HIS TIME WOULD ALREADY KNOW THIS

It is possible, use febond blue grit plaster bonding from wickes prior to plastering.

Definitely possible. Ensure all existing plaster is sound and not blown.

Skimming you will do over plaster.

yes but it must be free from any old loose plaster and must be uni bonded or SBR then you can skim over to a perfect finish

Yes it is possible providing the wall is in good condition. I.e if the wall has blown.

Heya, a plastered finish will give a more smooth, durable surface for a living area, if you tape and jointed it and say you were moving furniture around you are less likely to damage a wall that has been plastered than a wall that hasn't, and to be quite honest the time it takes to tape and joint a wall and then sand it down ready for painting is around about the same amount of time to skim it, plus it's a little more soundproof. Hope this helps.

las

as long you prep it proper and good two coats will be fine.

You can plaster over old plaster if old plaster is sound and a bit scruffy
It will need sealing depending on paint and wall condition but your plasterer will advise you on this

Post a job & receive quotes from locally reviewed plasterers

Post a job & receive quotes from locally reviewed plasterers

Post a job & receive quotes from locally reviewed plasterers

How it Works

Post a Job
Step 1
Post a job for free

Tell us what you need, and we'll notify matching tradespeople in your area.

Tradespeople Respond
Step 2
Hear from interested tradespeople

Interested tradespeople can respond to your job through MyWorkman.

Review profiles and choose
Step 3
Review profiles and choose

Read customer reviews and exchange contact details with the tradespeople you want to speak to.