My cooker is not working and I don?t know if it is the cooker or the electrics.
When switching the cooker on at the wall switch the red light comes on but it is not as bright as before. However when turning the dials to put the hobs cooker or grill on the light is going off.
I have tried switching the cooker switch off at the electric box and turning it back on but I don?t know what else to do to establish if I need a new cooker or an electrician to look at the switch.
I would call an electrician to come out and inspect both to be safe.
The fault in switch and you need to get electrician and changed the switch.
It sounds like the terminals at the switch could be loose. get an electrician to look
As long as the red light comes on at the wall switch you definitely still have power there so no problem you will need to check the cooker or even how the cooker was installed.
It would need further investigation but best guess I would say your cooker is at fault
Call a qualified electrician to look at this problem, it could be a number of things. The electrician will be able to test the circuit and advise you on the problem.
It could be a switch it needs to be tested by a qualified electrician
You need to call an electrician to test the circuit
You will definitely need an electrician to investigate your cooker, as it can be anything from a faulty cooker switch to an under-rated circuit or a faulty cooker. I would suggest you get it checked immediately.
The circuit would need to be checked but I would say from your description it sounds like the cooker. It could possibly be an element
You need Electrician to check power in and out of Switch then that will tell you if sufficient supply to cooker and if so faulty cooker if not then Electrician to find reason for reduced power and rectify
I would recommend a check was completed
I think checking the switch first, a quick test on switch will establish fault
You need to hire an electrician to investigate this. For me it's most likely that electrics is failing. The neutral line to your cooker must have lost continuity
This could be a faulty switch but I would highly recommend getting someone out to come and have a look.