Pullcord bathroom electrics
When I turn my pullcord on the light comes on but when I then turn the shower on the pullcord light goes off and no power to shower. Is the problem with my pullcord or shower? any advice would be very appreciated!
14 Answers
Moise
1 Reviews, 100% Positive
It makes a short-circuit. I think is your shower leaking and gets water near your cables and takes your power out
28th Oct 2021
Helpful Answer? Vote Up 
+ 115
+ 115
Post your job & get responses from
local electricians.
Read reviews before you decide to hire.
HEMS
42 Reviews, 98% Positive
Sounds like a wiring error, has it been in long
22nd Oct 2021
Helpful Answer? Vote Up + 110
+ 110
fenhomes & son property repairs and maintenance
2 Reviews, 100% Positive
Seems to me there is a fault in the wiring they should be on separate wiring feeds and not interfere with each other
11th Nov 2021
Helpful Answer? Vote Up + 109
+ 109
Simpler maintenance
0 Reviews
There has been incorrect wiring which should be checked by an electrician as soon as possible as the are completely separate circuits with very different power ratings.
22nd Nov 2021
Helpful Answer? Vote Up + 108
+ 108
Da contractors
0 Reviews
Is the breaker in your fuseboard tripping when you turn on the shower.
The circuit the lights are working on shouldn't have anything to do with the shower circuit only thing I can see happening here is your rcd is tripping indicating you have a faulty shower unit
The circuit the lights are working on shouldn't have anything to do with the shower circuit only thing I can see happening here is your rcd is tripping indicating you have a faulty shower unit
10th Nov 2021
Helpful Answer? Vote Up + 106
+ 106
Voltage Contractors Ltd
0 Reviews
Hi,
Could you tell my if you have to reset an MCB or RCD at your consumer unit?
Kind regards
Rich
Could you tell my if you have to reset an MCB or RCD at your consumer unit?
Kind regards
Rich
9th Feb 2022
Helpful Answer? Vote Up + 98
+ 98
Benjamin Lawton Domestic Electrician
0 Reviews
It sounds like fuse is being blown on the pull cord or a loose connection. When you turn the shower on and power goes between the fused pull cord and the unit, disconnection as required in a fault is taking place. An issue with the wiring is likely
27th May 2022
Helpful Answer? Vote Up + 88
+ 88
This seems to me as if the power to the pull chord is split feeding the light and the shower. If this is the case it needs looking at urgently due to the severity.
17th Oct 2022
Helpful Answer? Vote Up + 69
+ 69
Phazed out electrical
1 Reviews, 100% Positive
You have a Faulty pull cord switch
28th Jan 2023
Helpful Answer? Vote Up + 57
+ 57
Gsbelectrical80
0 Reviews
This would need investigating further. Could be a loose connection within the pull cord or even a burnt out cable causing the issue. Has the correct cable size been used for the KW loading of the shower. If not over time the cable burns out causing a fault
17th Aug 2023
Helpful Answer? Vote Up + 49
+ 49
Jta installations
0 Reviews
Something is very wrong here as the shower should be on a separate circuit!
24th Nov 2023
Helpful Answer? Vote Up + 37
+ 37
Current Circuit
0 Reviews
It is a wiring fault the power to the pull cord is being fed from the shower isolator which should not be the case.
26th Mar 2024
Helpful Answer? Vote Up + 4
+ 4
Post your job & get responses from local electricians.
Read reviews before you decide to hire.
