Pressure valve seal melted, why!?
Plumbing
•
198 views
•
0 answers
The sealant that holds the Baxi water pressure valve dial has melted! Why would it do this
Low shower pressure through shower diverter valve
Plumbing
•
198 views
•
0 answers
Recently moved into a house with some oddities. There is a bathtub with jacuzzi jets which seems to be working ok. There was no shower facility however so I bought a diverter valve so I could hook up a shower hose to the existing tap The water pressure when I …
Radiators in hot water circuit?
Plumbing
•
197 views
•
1 answer
In this hot weather two radiators keep getting hot. Bathroom and hall. Is it possible that they are plumbed into the hot water circuit?
Pipe spacing
Plumbing
•
197 views
•
0 answers
What is the minimum distance for hot/cold water pipe spacing running in parallel? And which part and section is it on the Building Regs? Thanks Freddy
Cold water supply problem -- bathroom hand basin
Plumbing
•
197 views
•
0 answers
The cold water supply to hand basin in our bathroom comes direct from the header storage tank in the loft above. This has been the case since the house was built in 1947. Over the last 3 years or so the supply to the cold tap has tended to turn …
shower mixer tap?
Plumbing
•
196 views
•
0 answers
Can you change a screw type flow valve with a tap washer on for a ceramic one
Cap for drain pipe behind washing machine
Plumbing
•
190 views
•
0 answers
Can anyone recommend a plumbing component for this problem? We have a washing machine whose hose connects into a plastic drain standing vertically behind the washing machine. When the machine drains it smells bad. Can anyone recommend an adjustable cap for the drain with a hose fitting?
Condensate pipe
Plumbing
•
189 views
•
1 answer
The upstairs flat had a plumber install a condensate pipe into the rain/waste pipe.I now have an intermittent leak since it was installed.Where can I find somebody to look and provide a report if this is cause of leak.Thanks.
water loses presure
Plumbing
•
189 views
•
1 answer
WHAT IS THE SOLUTION TO FIXING MY LOSS OF PRESSURE UPSTAIRS WHEN THE DOWN STAIRS WATER IS ON
Low pressure taps on high pressure system?
Plumbing
•
189 views
•
0 answers
I have just had a new combi boiler system fitted and the boiler fitter did not change it over to mains flow, leaving a poor flow around the house. 45mins? + to fill a bath and over a minute wait for hot water to reach the kitchen. His reason was …