Contraption required to unscrew a kitchen mixer tap
Plumbing
•
4 views
•
5 answers
I need to dismantle my kitchen mixer tap which has levers. I know where to unscrew it but these areas are flat so an Allen key or screwdriver would not work. It is very difficult to explain but I can provide a photograph.
Washing machine drain non-return valve & connector
Plumbing
•
4 views
•
2 answers
Initial context: We newly installed a dishwasher next to our washing machine some time ago, using a Y-connector to connect both machines' drain hoses to a single hose which in turn connects to the drain beneath the sink. However, the washing machine apparently lacks an inbuilt non-return valve, as the …
Quarter-turn mixer tap
Plumbing
•
4 views
•
1 answer
How do I replace the cartridge in a quarter-turn kitchen mixer tap where I can remove only the "lever" and the end fitting which is held in place by the adjustment lever. There are no removable caps or grub screws.
Washing Machine Installation
Plumbing
•
3 views
•
13 answers
I am buying 2 washing machines and want to have them installed in a place where there was only 1 washing machine before (right next to each other). I do not want to do a whole big thing with the plumbing. Is it possible to buy a bit of pipe …