History:
KITCHEN SPLASH BACKS
WALL & FLOOR TILING
UNDERFLOOR HEATING
FULL BATHROOM INSTALATIONS
MOSAIC TILING
NATURAL STONE TILING
Answers:
Foil tape [as used for pipe lagging] is very tough easy way to seal the bottom of panel, cut with circular saw and sand smooth, apply tape starting on exposed outside edge and about 4-5mm up, wrap around to rear. once installed seal with silicon to floor [this will hide thin edge of exposed
£10 t £15 per square meter for
You can install the tile directly on the concrete. you can install a cbu or cement board on the concrete, then the tile on top of that. finally, you can use an uncoupling membrane between the tile and the concrete.
to reduce the possibility of cracking, an intervening material called an uncoupling membrane can be used. an uncoupling membrane disconnects tile from its concrete subfloor and prevents cracking in the slab from being transmitted upward to the tile job. available under the brand names schluter ditra or redgard uncoupling mat, this product is also known as anti-fracture membrane, crack isolation membrane, or crack suppression membrane.