Fit new sink & mixer tap. Replace/lower waste traps & fit new cold water stop valve.
I have the sink & the mixer tap. I do not have a new valve or a new 1 & 1/2 bowl waste trap set. I can get these if easier from screwfix.
I currently have a 1 & 1/2 bowl kitchen sink and a mixer tap. The current sink is 960mm and I have bought a new sink which is 1000m, I’m not certain whether the current cut can fit it or not. I may need 40mm cutting width wise and do not have a jigsaw.
My current mixer tap has a slow drip on cold. I have tried to remove this but was unable to as I couldn’t loosen the waste screws. My hot water stop valve turns completely off but the cold valve turns 3/4 and won’t go any further, I believe this will need to be replaced.
My current waste trap system is very old and needs replacing. A hole is cut in the cupboard board at the back for it to go out. The new sink is deeper than the old so this may need to be adjusted.
Looking for a quote to manage entire job. Can FaceTime/video call to discuss and show you what I mean.
Very quick to reply and completed work to a high standard. Replaced our kitchen sink & mixer tap. Would recommend to anyone looking for professional plumbing work at a competitive price.
Get your project started
Post your job & get quotes from local tradespeople. It's free & easy!