"Remove old felt and replace with new felt on medium sized shed in back garden."
"We recently ordered a Billy Oh Boxer Pent Metal Shed (5ft(w) X 9ft(l))including a steel foundation kit from Garden Buildings Direct and looking for someone to construct it for us. The shed will be placed directly on to our decking. "
"I need the felt replaced on my shed roof (I have a roll of felt and the nails) as well as the wooden fascias. The measurements of the shed are approximately 6ft x 4ft."
"I have recently bought a shed & I will need it to be put up."
"6 foot x 7 foot garden shed needs felt roof replacing. May require replacement of thin timber slats holding felt in place."
"Two sheds, one with a flat roof, need rooted to be recovered"
"As above.Felt (?) roof at the moment but willing to discuss other roofing options"
"I require re felt for 10 by 6 ft garden shed roof build of a base either cement or plastic then shed set up priced for job with or without materials included I can seek the materials myself being disabled it's going to be very differcult, To complete "
"Roofing felt has come off on one side. Roof is about 8 or 10 foot long and 3 or 4 foot wide. Battens are old and other side may need replacement roofing felt as well. "
"My shed roof has had its felt ripped away. I need either a repair or a replacement."
"Remove remnants of old covering and replace"
"The felt from my garden shed had been blown off and damaged. I am looking for someone who can replace it."
"would like a quote for laying a shed base, turf removal then levelling gravel for drainage mortar, I have slabs"
"Remove old bitumen felt and put new cover; remove and dispose of old felt"
"Small shed needs its roof striped and re felt"
Shed
Garages & Sheds job 7 miles from Moorgate in New Southgate
"Change felt on shed. "
"Water is leaking into my shed. Needs to be water proofed. Many thanks"
"Would you be interested in building me a shed? I am after a couple keen quotes but then pretty much ready to go (area already cleared in readiness). The project doesnt require planning permission (as will be 2.4m in height) and I have already have gone through the Certificate of Authority process so should be ready in a week or two to go ahead - if this works with you.
If you are interested give me your email and I will send over the plan of proposed shed.
Sizes: Main rectangle (3m x 5m) plus higher level storage part on right (1m x 4m).
Usage: starting as storage area then become a tool/handy making area with relaxing space (need insulation so can be used year round).
What type of shed?
Base concrete then dpm. Will need good sound/heat insulation plus lighting/power and water provision (even could be as basic as a hose). We will supply a basic mini kitchen.
Floor - treated timber 125mm x 47mm (C16) (undergone a chemical treatment to prevent fungal attack and rot) using angle brackets
to screw joists to the concrete blocks.
50mm Celotex board insulation. Breathable membrane paper sandwiched between. Tongue and grove plywood 18mm sprayed with high quality timber preservative. Laying techni boards over that.
Stud walls: Thinking timber 47mm x 100mm.(C24) doubled up where the doors go. 50mm Celotex board insulation.Breathable membrane paper.
Internal walls: Green plasterboards, Plastering and Painting.
External construction/Insulation - currently thinking about using hardwearing plastic (fascia look a like wood design) in either overlap or v section to reduce future maintenance/damp/mould.
For cladding/like wood fascia currently thinking: Eurocell cladding/shiplap-cladding/shiplap-cladding-oak-on-white-x-5m.
Thinking about the wall construction - using 44mm x 69mm hardwood, the cavity filled with 50mm foil backed insulation celotex board. Internally the walls lined with 9mm painted MDF.
We already have the x2 mahogany bi-fold doors (due to their weight a solid skeleton is needed).
Roof: Sprayed fibreglass. Treated timber 125mm x 47mm (C16), green plasterboards and 50mm Celotex. Base to fibreglass - 18mm OSB3 Boards.
Two 1m x 1m roof windows (need to source).
Windows & doors
- Re-using existing garden room x3 narrow double glazed horizontal windows (non-opening) and x2 box windows either side (right hand side upper section and above w/c on left).
- Bi-fold doors already supplied (on site).
Internal design - one large room/space with small rectangular higher level to store tools.
Surface water/guttering - The roof slopes downwards (to the right) as shown in design attached. So UPVC guttering is required along the whole of the right hand side. The down pipe potentially located at the back of the right hand side with a water butt underneath. The aim is to reduce all potential puddling/surface water.
Both water and electrics to be supplied via the house during the works. If necessary a new supply can be taken from the consumer unit within house.
Hope this give you a bit of an overview!
If this is of interest, please send me a couple examples of your work and connect with me. Thanks.
"
