"Old felt roofing has been ripped up due to the windy weather and the shed needs a new roof approximately 260 cm x 191 cm."
"To remove old felt roof and replace. "
"Remove old shed, put up new log shed. Shed already here. Paved surface.. easy access, central St Albans."
"I have a 10ft x 6ft garden shed where the roof felt has blown off, mostly on the one side. I have the felt and flat roofing nails and the water proof paint. I need a tradesman to take it all of and replace it. "
"1. Remove and dispose old wooden garden shed
2. Relocate and build new plastic keter garden shed and base"
"Simple replacement of shed roof felting and some replacement of rotten wood"
"Each side of roof measure 2.4m long by 1.2m wide "
"I need a new roof for my garden shed as its got a hole in it due to overgrown bushes and the weight of someone chopping them down. Also, need a new garden back gate"
"remove old felt that is falling off, replace with preferably EDPM rubber roofing, possibly making good of sub-structure. Area approx 3x3.8m"
"I have a small shed roof needs repairing. The felt has come off and some of the hardboard roof will need repair. There may be some other items of minor repair to the exterior of the shed."
"We have a fairly new shed and the roof has started to leak in a couple of places. Have tried to fix, but I think the whole roof needs replacing. It is approx 12 x 6 (will confirm dimensions when I get home) "
"Shed roof has a hole in it and needs repairing, may need a new roof.
The door has also dropped and won?t lock. "
"My shed roof is leaking and needs refelting. End batons also need to be replaced as rotting. Possible repaint of shed required."
"Would you be interested in building me a shed? I am after a couple keen quotes but then pretty much ready to go (area already cleared in readiness). The project doesnt require planning permission (as will be 2.4m in height) and I have already have gone through the Certificate of Authority process so should be ready in a week or two to go ahead - if this works with you.
If you are interested give me your email and I will send over the plan of proposed shed.
Sizes: Main rectangle (3m x 5m) plus higher level storage part on right (1m x 4m).
Usage: starting as storage area then become a tool/handy making area with relaxing space (need insulation so can be used year round).
What type of shed?
Base concrete then dpm. Will need good sound/heat insulation plus lighting/power and water provision (even could be as basic as a hose). We will supply a basic mini kitchen.
Floor - treated timber 125mm x 47mm (C16) (undergone a chemical treatment to prevent fungal attack and rot) using angle brackets
to screw joists to the concrete blocks.
50mm Celotex board insulation. Breathable membrane paper sandwiched between. Tongue and grove plywood 18mm sprayed with high quality timber preservative. Laying techni boards over that.
Stud walls: Thinking timber 47mm x 100mm.(C24) doubled up where the doors go. 50mm Celotex board insulation.Breathable membrane paper.
Internal walls: Green plasterboards, Plastering and Painting.
External construction/Insulation - currently thinking about using hardwearing plastic (fascia look a like wood design) in either overlap or v section to reduce future maintenance/damp/mould.
For cladding/like wood fascia currently thinking: Eurocell cladding/shiplap-cladding/shiplap-cladding-oak-on-white-x-5m.
Thinking about the wall construction - using 44mm x 69mm hardwood, the cavity filled with 50mm foil backed insulation celotex board. Internally the walls lined with 9mm painted MDF.
We already have the x2 mahogany bi-fold doors (due to their weight a solid skeleton is needed).
Roof: Sprayed fibreglass. Treated timber 125mm x 47mm (C16), green plasterboards and 50mm Celotex. Base to fibreglass - 18mm OSB3 Boards.
Two 1m x 1m roof windows (need to source).
Windows & doors
- Re-using existing garden room x3 narrow double glazed horizontal windows (non-opening) and x2 box windows either side (right hand side upper section and above w/c on left).
- Bi-fold doors already supplied (on site).
Internal design - one large room/space with small rectangular higher level to store tools.
Surface water/guttering - The roof slopes downwards (to the right) as shown in design attached. So UPVC guttering is required along the whole of the right hand side. The down pipe potentially located at the back of the right hand side with a water butt underneath. The aim is to reduce all potential puddling/surface water.
Both water and electrics to be supplied via the house during the works. If necessary a new supply can be taken from the consumer unit within house.
Hope this give you a bit of an overview!
If this is of interest, please send me a couple examples of your work and connect with me. Thanks.
"
"My garden shed is 330cmx275cm (LxW) and the height at the tallest point is 235cm with the slope ends height being 190cm each sides. It leaks when raining. I had a handyman applied some bitumen on the felt but did not fix the issue at all. Would like to refelt and fix the leaking problem."
"We require the garden shed roof to be replaced both felt and timbers as at least half the timber is sodden.
Very rough size 6 ft x 4 ft.
Access to garden via back gate so work can be undertaken at will. We will need a quote for the landlord although we will be undertaking arrangements and payment. "
"Flooring edge near back wall of shed is coming away and sagging ...letting in rain water and soaking flooring. Shed is fixed up close to fencing so job has to be approached from inside. Small job. Looking for someone local that does not have to travel far to this job."
"To take down old shed dispose of rubbish and erect anew one"
"As stated - just to remove old felting and replace and fit new on 12ft x 10ft wooden shed"
