Electrical fitting jobs in Berriedale

Fill any gaps you have in your schedule.
Tradesman Start

Electrical fitting Jobs in Berriedale (completed jobs only)

2 wall heaters and door intercom not working
Electrical fitting job 331 miles from Berriedale in Manchester
2 wall heaters - that lay back to back on each side of a wall - will not turn on. This issue has occurred before and at that time, it was a broken wire to the main fuse box (close by). Also, the intercom buzzer doesn’t work in the upstairs unit but again, this happened before and the issue was a wire connecting to the fuse box.
Replace isolator switch on hot tub
Electrical fitting job 400 miles from Berriedale in Hinckley
Corroded isolator switch feeding hot tub needs replacing
Power point to boiler dead so might need new wire
Electrical fitting job 328 miles from Berriedale in Salford
The switch to turn my boiler on not working. Think it might need a new wire.
double oven the lower part not working
Electrical fitting job 480 miles from Berriedale in Chiswick
It Siemens double oven it is working just before trying to change the connection by ammeter he did not know how to do it but the oven has no problem
1 half of a 2 plug socket is not working.
Electrical fitting job 376 miles from Berriedale in Nottingham
One half of a 2 plug socket requires repair.
Install 4 ceiling lights in a new house
Electrical fitting job 474 miles from Berriedale in Harrow
A wire with a light bulb is already there.
Replace shower switch
Electrical fitting job 519 miles from Berriedale in Portsmouth
Replace switch to shower in bathroom
Replace 4 ceiling light fittings
Electrical fitting job 333 miles from Berriedale in Stockport
Four new ceiling light fittings to replace old fittings.
Bathroom vent fan installation
Electrical fitting job 331 miles from Berriedale in Manchester
Remove the old fan and install a new fan I have purchased
need earth bonding for gas meter and water pipes
Electrical fitting job 331 miles from Berriedale in Manchester
Need earth bonding work to the gas and/or water up to 18th edition standards.
Replace 2 ceiling mounted light fixtures
Electrical fitting job 440 miles from Berriedale in Newmarket
Replace 2 ceiling mounted light fittings
Plugs and lights
Electrical fitting job 344 miles from Berriedale in Macclesfield
3 new socket fronts. 2 new light switches. 1 new bathroom light. 2 new plugs in new kitchen. 1 socket and back box in bedroom.
uninstall electric cooker and install a diswaher in its plce
Electrical fitting job 485 miles from Berriedale in Streatham Hill
There is an electric cooker to be removed and a dishwasher installed in place of it. It will be about 160 cms from the sink drain, The job will need a plumber too.
changing an electric induction Hob & bathroom extractor fan
Electrical fitting job 485 miles from Berriedale in Crofton Park
As above. Needs to be done on Saturday the 3rd of Feb.
Replace flourescent ceiling light fitting in kitchen.
Electrical fitting job 532 miles from Berriedale in Saint Leonards-on-sea
Fit new LED light in kitchen. 1.5 metres.
light switches
Electrical fitting job 478 miles from Berriedale in Kilburn
3 small jobs: 1) the cord came out of a bathroom light. Can we reconnect, either with the original cord or a switch? 2) Fixing a kitchen light. 3) Checking a faulty plug socket.
Oven installation
Electrical fitting job 489 miles from Berriedale in Thornton Heath
Old ovens needs removing and new one fitted. Both ovens come with a plug so doesn’t need wiring
small electric job
Electrical fitting job 453 miles from Berriedale in Newport
ceiling fan switch replaced in Bathroom and kitchen, electrics added to bathroom and outdoor socket to be fitted.
three small jobs need doing around the house.
Electrical fitting job 499 miles from Berriedale in Sevenoaks
Tricky power point in bedroom needs replacing Porch light needs new bulb holder and wire Outside light on senser may need replacing
Replace extractor fan
Electrical fitting job 468 miles from Berriedale in Bristol
Replace bathroom extractor fan which is in the attic. Length of vent tube (which we have) also needs to be replaced.