Last week I went to put the light on and the glass bit of the bulb popped out all in one piece. I got the metal bit out easy. Changed the bulb but now it doesn't work. Checked fuse box and is all switched on any helpful information?
Oerhaos if there is a transformer attached to it then that might have blown hence the pop and surge. Would be willing to replace the transformer for yoy
Post your job & get responses from
Read reviews before you decide to hire.
Sounds as if you will need a new fitting installed as bulb blowing seems to have blown part of fitment
sometimes there can be a loose connection in the holder as the slight movement can do this , also if it is a B C holder then try checking one of the spring-loaded contacts to see if it has stuck down ? If you are doing this yourself please be certain to isolate your electric first .
Depending on the type of lamp , it may have a transformer in the ceiling which is where the problem is. Or you may have a faulty lamp. Even new lamps can be faulty , so it may be worth trying a lamp in another fitting to prove it works first.
Internal circuity of light could have been damaged when you removed metal casing.
The lamp hold is faulty. It was experiencing partial contact that was why it popped out.